Illuminated Cadillac Emblem

Each product listing specifies the model years it covers. Grille openings and badge dimensions changed mid-generation on several Cadillac models, so the emblem cut for a 2017 XT5 will not seat correctly in a 2021 grille. Check your badge width against the listed dimensions before ordering. If your model or year is not listed, or you are unsure which generation your vehicle belongs to, contact our team with a photo of your grille and we will confirm fitment before you order.

No. These are aftermarket illuminated Cadillac emblems. Caddyaccessories is an independent retailer and is not affiliated with, endorsed by, or sponsored by General Motors or Cadillac. Model names and year ranges are referenced solely to indicate vehicle compatibility. Every unit is manufactured to OEM badge dimensions so it seats in the factory mounting position without modification, but it is not a GM-supplied component.

They are the same product. Illuminated emblem, light up emblem, LED emblem, lighted emblem, and emblem light are all names for a backlit badge that replaces the flat factory crest. Different manufacturers and retailers use different terms, which is why searching for any of them returns similar results. We use illuminated Cadillac emblem as the standard name across this range for consistency.

Animated units run a sweep across the crest for roughly three seconds at start-up, then hold a steady glow — this is the effect most buyers are looking for and it mirrors the illuminated badge behaviour used on recent factory Cadillac models. Static units illuminate immediately with no start-up sequence and hold constant brightness. Colour-shift units cycle through a fixed palette and are offered on selected XT4, ATS and Escalade fitments. The available modes are listed on each product page.

The emblem taps into your existing 12V circuit — normally the daytime running light or parking light feed on front fitments, or the tail light circuit on rear fitments. It illuminates automatically whenever those lights are on, with no separate switch, no additional battery, and no permanent draw when the vehicle is off. Rear tailgate emblems can alternatively be wired to the reverse light feed if you prefer the crest to light only when reversing.

No. Every emblem in this range is plug and play. Depending on your vehicle, it connects either directly to the factory harness connector behind the grille or to a switched circuit at the fuse box. No scan tool, no OBD adapter, no dealer visit, and no ECU or module changes are required at any point. Our full guide covers both wiring methods step by step: How to install a Cadillac illuminated emblem.

Front grille emblems connected to the factory harness typically take 20 to 30 minutes. Fuse box connections allow 30 to 45 minutes. Rear tailgate emblems usually take longer at 40 to 60 minutes, since the interior trim panel must be released to reach the badge studs. No drilling, no cutting of factory wires, and no specialist tools are required. Written installation instructions are included with every order.

Yes. All emblems in this range carry an IP67 waterproof rating, confirmed safe against rain, snow, road spray, and standard car washing including automatic washes and pressure washing at normal distance. The sealed housing prevents moisture ingress under all normal driving and washing conditions. Avoid aiming a high-pressure lance directly at the wiring grommet where the harness enters the housing.

We stock model-specific illuminated emblems for the Cadillac XT4, XT5, XT6, XTS, CT4, CT5, CT6, CTS, ATS, Escalade and Lyriq, plus a universal rear tailgate emblem. Each product listing specifies the exact compatible year range for that fitment. If your model or year is not listed, contact our team before ordering and we will confirm availability.

Rules vary by state and country. White and amber forward-facing light is generally accepted across most US states. Red and blue forward-facing light is restricted in the majority of states because those colours are reserved for emergency vehicles, which is worth knowing before choosing a colour-shift version. Flashing or strobing forward-facing light is more widely restricted still. Check your local vehicle lighting regulations before ordering if you plan to run a coloured mode on public roads.

In most cases no. An aftermarket emblem that leaves all factory wiring intact and requires no ECU or module changes does not void the powertrain or vehicle warranty in most jurisdictions. The installation is fully reversible and the original badge can be refitted at any time. Retain your factory badge and your proof of purchase. If a fault ever arises in a system near the installation, a dealer may ask about aftermarket parts, so keeping the original hardware makes that conversation straightforward.