Cadillac Armrest Cover
The centre console lid is the hardest-worked surface in a Cadillac interior. Your elbow sits on it every journey, and on leather or leatherette it is usually the first panel in the cabin to show shine, creasing and wear. A fitted suede cover takes that contact instead — and on an older car, hides the wear that is already there.
Cut to Your Model
These are not stretch-to-fit universal covers. Each one is patterned from the console dimensions of a specific model, so it follows the lid edges without bunching at the corners or sliding under your arm.
Available fitments: ATS, CT4, CT5, CT6, SRX, XT4, XT5 (2016-2019), XT5 (2020+), XT6 and XTS. Select yours from the images above.
Note the XT5 is split into two fitments — the console shape changed for 2020, so check your model year rather than assuming. Compare your lid against the thumbnails before ordering, and if you are unsure, send us a photo through Contact Us, and we will confirm.
Suede, Hand-Stitched
The face is eco-friendly suede, which is warmer under the arm than leather in winter and does not get uncomfortably hot in summer sun the way vinyl does. The surface pattern is hand-sewn rather than glued or heat-pressed, so the stitching holds its shape through daily use instead of lifting at the edges.
Fitting
The cover slips over the lid and grips on its own — no adhesive, no clips, no tools. It comes off just as easily for cleaning, and takes nothing with it if you remove it before selling the car. The lid opens, closes, and latches exactly as before, and the cover does not foul the storage compartment.
What’s in the Box
One Cadillac armrest cover in your selected fitment.
Frequently Asked Questions — Cadillac Armrest Cover
Which models does this fit? +
Ten fitments are available: ATS, CT4, CT5, CT6, SRX, XT4, XT5 (2016-2019), XT5 (2020+), XT6 and XTS. Each is cut to that model’s console lid shape rather than being a universal cover, so select the one matching your car from the images above.
Why are there two XT5 options? +
The XT5 console lid was redesigned for the 2020 model year, so the pre-2020 and post-2020 covers are shaped differently and are not interchangeable. Check your model year before selecting. If your car is a 2019 or 2020 and you are not certain which shape you have, send us a photo of your console and we will confirm.
Does the armrest still open normally? +
Yes. The cover sits on the lid surface only, so the hinge, the latch and the storage compartment all work exactly as before. Nothing is added to the opening edge and nothing obstructs the catch.
Does it use adhesive? +
No. It grips the lid by its own fit, so nothing is stuck to your interior and nothing is left behind if you take it off. That also means you can remove it for cleaning, or before selling the car, without any residue on the original trim.
How do I clean it? +
Lift it off and brush the suede with a soft brush to lift the pile. For marks, use a damp cloth and let it air dry away from direct heat. Avoid soaking it and avoid solvent-based interior cleaners, which flatten and discolour suede.
Will it cover existing wear on my armrest? +
Yes, and this is why many owners buy one. Shine, creasing and surface cracking on a worn leather lid are hidden completely once the cover is on, at a fraction of what retrimming or replacing the lid would cost. Deep splits that have deformed the lid shape may still show through as an outline.
Is this a genuine GM part? +
No. This is an aftermarket accessory. Caddyaccessories is an independent retailer and is not affiliated with, endorsed by, or sponsored by General Motors or Cadillac. Model names are used solely to indicate fitment.
Still have a question? Contact our support team — we reply within 24 hours.
Reviews
There are no reviews yet.