Cadillac Escalade Light Up Emblem
This LED emblem replaces the factory crest on the Escalade with a backlit badge that illuminates whenever your daytime running lights are on. The front unit is cut to the factory grille aperture and the rear unit to the tailgate recess, so both sit in the original mounting position with no trimming or adhesive.
Check Your Fitment Before Ordering
The Escalade badge changed size and mounting between generations, so fitment is the single most important thing to confirm.
- Front emblem: 261 × 102 mm (10.28 × 4.02 in). Fits 4th and 5th generation, 2015.5 onward.
- Rear emblem: 171 × 70 mm (6.73 × 2.76 in). Fits 2015.5 to 2020 only.
- 1st to 3rd generation: these models use the older Crest emblem and require a grille replacement before the LED unit will fit.
If your Escalade is 2021 or newer, order the front emblem only. The rear emblem does not fit the later tailgate. Measure your existing badge before ordering — if you are unsure, send us a photo through Contact Us, and we will confirm.
LED and Finish Options
Choose a clean white LED or a colour-shift option that cycles a fixed palette. The crest is available in gloss black, which stays dark until the LED fires and gives the strongest night-time contrast, or silver, which reads closest to the factory finish in daylight.
Specification
- Power supply: DC 12V ±10%
- Power consumption: 2W, 0.1A
- Harness length: 1500 mm (59 in)
- Mirror-finish face matched to the factory emblem
- Sealed against rain, snow, and car washes
Installation
The emblem connects to your existing 12V daytime running light or parking light circuit. No cutting of factory wiring and no coding required. Our guide covers both the harness method and the fuse-box method: installation guide.
Important: Please check your original emblem size before placing an order. We cannot be held responsible for incorrect sizing.
Package:
1* Cadillac Escalade Light Up Emblem
Frequently Asked Questions — Cadillac Escalade Light Up Emblem
Which Escalade years does this fit? +
The front grille emblem fits 4th and 5th generation Escalades from 2015.5 onward. The rear tailgate emblem fits 2015.5 to 2020 only and is not compatible with 2021 and newer. First to third generation models use the older Crest emblem and need a grille replacement before the LED unit will fit. Measure your existing badge against the listed dimensions before ordering.
Should I buy the front, the rear, or the set? +
If your Escalade is 2021 or newer, order the front emblem only — the rear unit will not fit. For 2015.5 to 2020 models the set is the better value at 10% off, and fitting both means the crest reads consistently from either end of the car. The front emblem alone is the most common choice since it is the badge people see first.
What does “Need DIY” mean on the first to third generation option? +
Escalades from the first three generations use the older Crest emblem, which is a different shape and mounting pattern. The LED emblem will not seat in the original opening, so the grille itself needs to be replaced with a later-style unit first. This is a workshop job rather than a driveway one, and the grille is not included in this listing.
How is the emblem powered? +
The emblem runs on 12V DC and draws only 2W, connecting to your existing daytime running light or parking light circuit so it illuminates automatically. The included harness is 1500mm, long enough to reach the fuse box on the Escalade without an extension. Rear emblems can alternatively be wired to the tail light feed.
Is installation difficult? +
The front emblem is plug-and-play for most owners: remove the factory badge, route the harness behind the grille, and connect to the power source. Allow 30 to 45 minutes. The rear emblem takes longer because the tailgate trim panel must be released to reach the badge studs. No cutting of factory wiring and no coding is required in either case.
Is it waterproof? +
Yes. The housing is sealed against rain, snow, road spray and standard car washing including automatic washes. Avoid aiming a pressure washer lance directly at the harness grommet from close range.
Is this a genuine GM part? +
No. This is an aftermarket illuminated emblem. Caddyaccessories is an independent retailer and is not affiliated with, endorsed by, or sponsored by General Motors or Cadillac. The Escalade model name is used solely to indicate vehicle fitment.
Still have a question? Contact our support team — we reply within 24 hours.
Reviews
There are no reviews yet.